Tilta Nucleus-M Wireless Lens Controller

Create a full-featured wireless lens control system with this Tilta Nucleus-M and Nucleus-Nano Wireless Focus Control Kit put together by B&H. The kit comes with a Nucleus-M FIZ lens wireless control motor, a motor power cable, a Nucleus-Nano wireless handwheel focus controller, and a wireless focus control motor.

Wirelessly control your camera’s focus and run/stop function from 300′ away with the battery-powered handwheel. Connect to the Nucleus-Nano motor or use the Nucleus-M motor instead for higher-torque operation. The motors connect to your cine lens focus ring with a standard 0.8 MOD gear. The Nucleus-M motor can be powered by a D-Tap source with the included 7-pin motor cable, and the Nucleus-Nano motor can be powered by a separately available micro-USB motor cable.

Tilta Nucleus-M FIZ Lens Control Motor

The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.

The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.

Features

• Brushless motor with an integrated motor drive
• Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
• Motor clamps onto 19mm or 15mm rods (with included bushing)
• Power via separately available D-Tap cable or daisy-chain to additional motors
• Automatic and manual calibration
• For focus, iris, or zoom control
• High, medium, and low torque settings
• Status display window

Tilta Nucleus-Nano Wireless Focus Hand Wheel Controller

Pair this Nucleus-Nano Wireless Focus Hand Wheel Controller from Tilta with the Nucleus-Nano Motor to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.

The Hand Wheel is constructed with aluminum, plastic, rubber, and a sleek rosewood-lined handle for comfort and style. It can mount on a stand, rig, or gimbal such as the Gravity G2X with a rosette connector. One separately available 14500 lithium-ion battery is required to use the Hand Wheel.

Wireless focus wheel for DSLR, mirrorless, or cine-style lenses

Large, rosewood-lined wheel for style and comfort

Connect wirelessly to Nucleus-Nano motor from up to 300′ line-of-sight range via 2.4 GHz Wi-Fi

Powers via separately available 14500 lithium-ion battery for 6-hour operating time

Use start/stop function and set A/B limits with buttons on controller

Connects to rigs, arms, or gimbals with a rosette mount

Compatible with Nucleus-Nano Focus motor

Tilta Baseplate with 15mm LWS Rod Clamp for 95mm Lens Diameter

Attach this Tilta Baseplate with 15mm LWS Rod Clamp to the base of your camera and attach a separately available 15mm rod to the rod clamp. The Nucleus-Nano motor can then attach to the rod and provide focus control. The size of the plate and the spacing of the rod clamp are designed to place your motor gear against the focus gear of lenses with a 95mm diameter.

Tilta Single 15mm Aluminum Rod (3.94″, Anodized Black)

This Tilta Single 15mm Aluminum Rod is 3.94″ in length and anodized black. It is compatible with 15mm LWS and studio rod support clamps and chamfered to make it easier to slide rod-mounted accessories onto the end.

Tilta Nucleus-Nano Handwheel Attachment Plate for DJI Ronin-S/Gravity G2X

Attach your Nucleus-Nano handwheel to a Gravity G2X or DJI Ronin-S gimbal with this Nucleus-Nano Handwheel Attachment Plate from Tilta. The adapter attaches to the Ronin-S with one of the gimbal’s M4 screws, and it attaches to a rosette on the Gravity G2X with the included M6 screw. When attached to the gimbal, the handwheel slides into the plate and is tightened with the locking lever.

Tilta Nucleus-Nano Hand Wheel Adapter for Zhiyun Crane 1

Mount your Nucleus-Nano hand wheel to the handle of the Zhiyun Crane 1 with this Nucleus-Nano Hand Wheel Adapter from Tilta. This sturdy aluminum and steel adapter clamps to the Crane’s handle and is secured with a locking lever. The hand wheel attaches to the adapter with a screw.

Tilta 14500 Battery Charging Cable for Nucleus-Nano

Charge the 14500 batteries that power the Nucleus-Nano with this 14500 Battery Charging Cable from Tilta. The charger plugs into a USB power source and the other end connects positive and negative splitter ends magnetically to a single battery for charging.

Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable

This 23″ Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.

After powering one motor with this cable, other motors may be daisy-chained to each other.